This post covers the steps to reimage a Cisco FPR1010 device with FTD version 7.1.0, the same procedure will work on other 1000 series models. Refer to this Cisco Reimaging guide for more information.
- Connect to the console port of the Cisco FPR device and login
- At the prompt type scope system
- Run the command show detail
The System IP address is the IP address of the Management 1/1 interface of FPR 1000 device.
The software package will be download from a SFTP server installed on a laptop connected to the Management 1/1 interface.
Continue reading “Reimage Cisco FPR1010”
integrating IT 